India’s power sector encompasses 430+ GW installed capacity — thermal, gas, hydro, and renewable facilities requiring qualified operators and maintenance staff round the clock.
Metro Manpower supplies technical manpower for power plants across India — from 100 MW captive plants to 4,000 MW supercritical stations. Our candidates have experience with coal-fired boilers, gas turbines, HRSGs, steam turbines, generators, and BOP systems across NTPC, JSW Energy, Tata Power, Adani Power, and IPP sites.
Power plant operations demand reliability above all. The people running your plant need to handle normal operations, startup procedures, load changes, and emergency response — shift after shift, year after year. Metro selects O&M candidates specifically for this operational discipline, not just for generic plant experience.
Whether you need ongoing O&M staff, commissioning engineers for a new unit, or a complete maintenance crew for an annual overhaul, Metro provides the specialized power sector manpower your facility demands — from 500/660/800 MW supercritical operators to combined cycle GT specialists.
We cover the full lifecycle — from greenfield commissioning, through ongoing 24/7 O&M, to annual boiler/turbine overhauls and emissions-compliance retrofits (FGD, SCR, ESP). Our crews know power plant permit-to-work systems, electrical safety, and the uptime bar that grid operations demand.
From operators to overhaul crews — tell us your power plant scope. First CVs in 48 hours, crews mobilized in under 2 weeks.
From thermal and gas to combined cycle, co-generation, and captive IPP facilities — we supply the full spectrum of power plant roles.
Operators and maintenance staff for subcritical and supercritical coal-fired units, gas-based open cycle plants — boiler operation, turbine operation, generator synchronization, and full BOP management.
GT operators, HRSG specialists, and steam turbine engineers for combined cycle configurations — gas turbine operation, HRSG management, and heat recovery optimization.
Operating and maintenance staff for captive power plants at refineries, steel plants, and manufacturing facilities, plus independent power producers across the merchant market.
Crews for refinery, plant & terminal turnarounds
Explore
NDT, welding inspection, third-party inspection for O&G assets
ExploreSite supervisors and erection engineers for O&G construction
Explore
Plant operators and maintenance engineers for ongoing operations
Explore
Process, piping, electrical, instrumentation engineers
Explore
Project managers, planners, cost engineers
Explore
Safety officers, HSE managers, permit coordinators for O&G sites
Explore
Welders, pipe fitters, fabrication crews
Explore
Full team deployment on Metro’s payroll
ExploreEvery power plant demands a specific mix of disciplines. We supply qualified professionals across operations, maintenance, and commissioning & special roles.
Subcritical and supercritical boiler operation — light-up, load changes, emergency response, and startup procedures.
Steam turbine operation, generator synchronization, load dispatch coordination, and turbine trip-and-recovery procedures.
Honeywell, Yokogawa, ABB, Emerson DCS platforms — matched to your plant’s specific control system and automation.
Balance-of-plant operations — coal handling, ash handling, DM plant, cooling towers, compressors, and water treatment.
Shift leadership, unit coordination, PTW issuance, load management, and incident response across thermal and gas units.
Water wall inspection, tube replacement, economizer/superheater repairs, and boiler pressure-part maintenance.
Steam & gas turbine overhauls, blade inspection, rotor balancing, bearing replacement, and major/minor outage execution.
Generator, transformer, HT/LT switchgear, motor, VFD, and relay-coordination maintenance across the plant electrical system.
Control & instrumentation maintenance — field transmitter calibration, loop checks, analyzer maintenance, and DCS/PLC troubleshooting.
Pumps, fans, ID/FD/PA fans, mills, and compressors — vibration analysis, alignment, seal management, and breakdown repair.
Boiler, turbine, electrical, and C&I commissioning engineers with multiple plant commissioning experience — from pre-commissioning to trial operation.
Flue-gas desulphurization, electrostatic precipitator, and SCR operation — emissions compliance for coal-fired power plants.
Stack monitoring, effluent quality, CEMS operation, and environmental reporting against MoEF & CPCB norms.
Unit heat-rate testing, turbine/boiler efficiency tests, acceptance testing per ASME PTC and ISO standards.
For annual boiler and turbine overhauls we mobilize 75+ multi-discipline maintenance crew — tube replacement, rotor inspection, blade repairs, and BOP refurbishment. Experienced across 500, 660, and 800 MW thermal units, plus CCGT overhauls. On-schedule unit return, zero LTI target.
For ongoing operations we supply boiler/turbine operators, DCS operators, maintenance engineers, and C&I technicians on rolling contracts. Rotating shift coverage, electrical-safety trained, PTW-aware — with the DCS-system familiarity your plant already runs on.
From supercritical O&M to combined cycle commissioning and annual overhauls — proven across India’s public and private power generators.
30+ operators and maintenance engineers for a 660 MW supercritical unit. All shifts covered — DCS trained, supercritical-experienced, with rolling rotation and zero unscheduled trips attributable to manpower.
15+ commissioning engineers for a gas-based combined cycle plant — GT, HRSG, and STG commissioning, auxiliary system checks, and trial-operation through grid synchronization.
75+ maintenance crew for a thermal power plant’s annual boiler and turbine overhaul — tube replacement, blade inspection, BOP refurbishment, and performance testing. Unit returned on schedule.
Delivering power plant manpower wherever India’s grid is generating — from NTPC and state utilities to JSW, Tata Power, Adani, and IPP assets, plus international power hubs.
Active deployment across India’s power generation clusters — NTPC supercritical units, private IPP fleets in Gujarat, Maharashtra & Andhra Pradesh, CCGT plants in Western India, and captive power plants at steel and refinery complexes — plus international power sector hubs.
Power generation demands supercritical skills, emissions compliance, and legacy-fleet expertise. Here’s how Metro’s 19-year approach directly solves them.
Supercritical units operate at higher pressures and temperatures than conventional plants. Metro maintains a dedicated pool of supercritical-experienced operators and maintenance staff — so 660 and 800 MW units get people who have actually run them.
FGD, SCR, and ESP operation and maintenance skills are relatively new requirements. Our database includes engineers trained on these pollution control systems — ready for MoEF/CPCB-compliant operation from day one.
Many 20–30+ year old plants need increasing maintenance effort. Metro supplies experienced maintenance engineers who understand legacy equipment, renovation & modernization, and the workarounds a veteran fleet demands.
We study your organization, site environment, and work culture to ensure technical and cultural fit.
We map exact roles, disciplines, certifications, experience levels, and deployment timeline.
We screen our 20,000+ database and deliver qualified, pre-vetted CVs within 48 hours.
We manage offers, documentation, certification verification, and logistics for site mobilization.
Post-deployment, we monitor performance, resolve issues, and maintain the relationship.
Yes. Operators and maintenance engineers with 660 MW and 800 MW supercritical experience — matched to your specific boiler, turbine, and DCS platform.
Yes. Boiler, turbine, electrical, and C&I commissioning engineers with multiple plant commissioning experience — from pre-commissioning checks to trial operation.
Yes. GE, Siemens, and Mitsubishi gas turbine operators and maintenance staff for both open cycle and combined cycle configurations.
O&M: 12+ months with annual renewal. Overhaul: 3–6 months tied to the shutdown schedule. Commissioning contracts are typically aligned to unit synchronization milestones.
Yes. See our Renewable Energy manpower page for solar, wind, biomass, and green hydrogen staffing — EPC and O&M crews across the renewable mix.
Mobilization for emergency maintenance starts within 24 hours. Our relationship-built database means power-plant-experienced candidates are available on short notice for forced outages and restoration.
From boiler and turbine operators to overhaul crews and commissioning engineers — tell us your power plant’s needs. We’ll deploy supercritical-experienced professionals fast.
